To Next Page

Page 1 of 8

User Guide

ACN Premium Wi-Fi Modem

MKTG-242 - Home Gateway ZXHN H268A Premium Wi-Fi Modem FTTN/B - 13.11.2018

Welcome to your new ACN Premium Wi-Fi Modem

In this guide you will nd the steps to follow when setting up and installing your ACN Premium Wi-Fi Modem.

Set-up Check list

Important note (new ACN nbn™ services only): Before you begin setting up the modem, please ensure you have:

Received your ACN activation email or SMS

This will be sent to the email address or mobile phone number you provided at sign up. This email conrms that

your ACN nbn™ Broadband service is ready for set-up.

Located the socket for your main incoming telephone line

Your ACN nbn™ service will use your existing telephone line (or a new line if a previous line did not exist).

If this modem has been provided to you as part of an ACN nbn™ bundle you will need to ensure that you can position your

phone close to where you intend to install the modem as you will need to directly connect it to your phone.

Setting up your ACN nbn™ Broadband service

Now that you have reviewed the check list above, you can proceed with setting up your nbn™ Broadband service. It’s

important to follow the steps in the order indicated to ensure your new ACN nbn™ service functions correctly. Specically,

DO NOT plug the modem into a power socket until you are instructed to do so in Step 4.

Your ACN Premium Wi-Fi Modem pack contains the following items:

1 x Ethernet cable

2 x Telephone cables

1 x Premium Wi-Fi modem

1 x Power supply

1 x VDSL splitter

(not required)

Other manuals for Zte ZXHN H268A

Questions and Answers:

Need help?

Do you have a question about the Zte ZXHN H268A and is the answer not in the manual?

General