Install the ZXHN H268A by Yourself
Read the Guide,Configure The ZXHN H268A Quickly
Only Four Steps, Easy to Use
Quick Installation Guide
Step 1: Install the ZXHN H268A
Step 2: Configure your Internet
Open a browser on your computer or notebook PC that is
connected to the router, and then enter http://192.168.20.1
in the address bar.
What is a browser?
Look at the right icons.
ZXHN H268A
Broadband Internet Access
RJ11 Cable
Power Outlet
Network Cable
RJ11 Cable
Splitter
Phone
ISP Network
Network Cable
IPTV STB
3
Wi-Fi
Laptop
Mobile Phone
4
Laptop
NBN Wall Socket
Connect to
the DSL port
Connect to
a WAN port
Connect to
a LAN port
RJ11 Cable
Phone
Connect to
the Phone port
5
ZXHN H268A
The ZXHN H268A provides the following Internet access methods for your choice:：
The port marked with DSL,which is connected to the Internet, as shown in .
If NBN Co. connect your address using NBN Fibre to the Basement or Node, you’ll connect ZXHN H268A to the NBN wall socket, as shown in .
http://192.168.20.1
In your computer(Windows 7),select Strart ->Control Panel->Network and Internet->Network and Sharing Center.
3
ZXHN H268A
To Next Page
