To Next PageTo Next PageHow to fix Invalid country error on ZUCCHETTI 1.1K-3K TL Inverter?
Check the country configuration in Section 6.3 (C) “5. Country” of this user manual for your ZUCCHETTI Inverter. If the configuration is incorrect, change it according to Section 6.3(A) “4. Configuration of country code” of this manual.
What to do if ZUCCHETTI 1.1K-3K TL shows Faulty SD error?
To resolve a faulty SD issue with your ZUCCHETTI Inverter, replace the microSD card.
General| Number of MPPTs | 1 |
|---|---|
| Nominal AC Voltage | 230 V |
| Protection Degree | IP65 |
| Cooling Method | Natural convection |
| Operating Temperature | -25°C to +60°C |
| Protection Features | Over Voltage |
| Communication Interface | RS485 |
Outlines safety procedures before performing maintenance or repairs.
Provides crucial notes and warnings for inverter installation.
Outlines the sequential steps for installing the inverter.
Details pre-installation checks for packaging and product integrity.
Instructions for inspecting the outer packaging for transport damage.
Procedure for verifying the product's condition after unpacking.
Lists all components included in the inverter's packaging.
Lists the tools needed for inverter installation and connections.
Details the requirements for determining the correct installation position.
Describes the correct method for safely moving the inverter.
Provides a step-by-step guide for mounting the inverter on the wall.
Overview of the steps for connecting various cables to the inverter.
Instructions for connecting the ground protection (PGND) cables.
Lists the requirements for preparing ground cables.
Details the procedure for preparing and connecting ground cables.
Guides on connecting DC power cables to the inverter.
Details the procedure for connecting AC power cables.
Explains how to connect communication cables to the terminal block.
Ensures all safety checks are completed before starting the inverter.
Checks photovoltaic strings for correct voltage and polarity.
Verifies DC connections for correct voltage and polarity.
Step-by-step guide to safely start the inverter.
General steps and checks for resolving inverter issues.
Details how to access and interpret recorded alarms and errors.
Common errors related to grid voltage and frequency.
Errors related to input voltage, current, and protection activation.
Faults concerning system operation and communication.
Errors related to performance, temperature, and insulation.
Faults related to software, country settings, and hardware.
Details key performance metrics like efficiency and consumption.
Lists safety protections implemented in the inverter.
Specifies compliance with relevant safety and grid standards.
Details communication interfaces and data storage capabilities.
Covers ambient conditions, dimensions, weight, and topology.
Summary of warranty terms and conditions.
