Zummo ZV25 - Accessories

33
1607033 UPPER LID DECORATION
1607034 LOWER LID DECORATION
1607035A SIDE DOOR ADHESIVE
1607036 SUPPLEMENTARY DECORATION
1607044 COIN BOX ZV25
1607052 LID KNOB CPU
1607052-1 CAM KNOB CPU
1607053 LOCK CPU
1607054 DISPLAY SUPLEMENT
1607071A DOOR STRIP ZV25
1607072A PAYMENT DOOR STRIP
1607073A CPU DOOR STRIP
1607102 WINDOW ROD
1607103 LOCK COVER
1608001 BILL FRAME LID
1609000 MAIN FILTER CLEANER
1609001 FILTER TRAY
1609002 FILTER TRAY
1609003 FILTER TRAY SUPPORT
1609004 RACK
1609006 FILTER CLEANER SUPPORT
1609007 FILTER CLEANER LID
1609008 GUIDE BASE
1609009 GUIDE
1609010 SCRAPER UNIT
1610001 ELECTRONIC PLATE CPU ZV25
1610002 SCREEN-PRINTED DISPLAY ZV25
1610005 CHUTE 613
1610006 CHUTE 425
1610007 CHUTE 298
1610008 RIGHT-HAND SIDE CHUTE
1610009 COVER OF CONNECTOR SUPPORT
1610010 BACK CHUTE
1610011 POWER SUPPLY ZV25
1610014 INTERIOR LED TUBE ZV25
1610015 TEMPERATURE SENSOR ZV25
1610016 CUP PHOTOCELL M18
1610022 LARGE EXTERIOR LED SET
1610023 SHORT EXTERIOR LED SET
1610024 LED START BUTTON ZV25
1610026 SPACER BEARING 4.2 X 8 X 17
1610027 RELAY 24 VDC 2 CC 30A
3/4/3 MID WASHER (PLASTIC)
10/21 CONDENSER 30µF (MOTOR 230V)
10/25 CONDENSER 100µF (MOTOR 115V)
10/28 CONDENSER 22µF (MOTOR 240V)
I-965-M4x10
COUNTERSUNK HEAD SCREW M4x10 DIN-
965
I-6923-M5 NUT M5 STAINLESS TENSILOCK DIN-6923
I-7981-
Ø5,5X22
SL PAN HEAD SCREW Ø5,5X22
I-7982-
Ø3,5x9,5
SL PAN HEAD SCREW Ø3,5x9,5
ROD.608ZZ TREAD
T-912-
M8x90
SCREW ALLEN M8x90 DIN-912
T-933-
M6x16
SCREW EXAG. M6x16 DIN-933
T-933-
M6x30
SCREW EXAG. M6x30 DIN-933
T-
Ø30/15/30-
M6
SILENT-BLOCK Ø30 15/30MM-M6
V0004 PLASTOMET WITH PIN M5 x 16 mm
V0009 PLASTOMET WITH NUT M5 NYLON
V0146 GLASS TUBE Ø9/12 (1.35m)
V0147 PADLOCK 300/25 Ø4
V0148 CABLE CHANNEL CPU Ø15,9
V0149 WHITE SILICONE TERMINAL END MTS.
V0163 HOPPER FRUIT CLASSIFIER STICKER 50-75
V0164 HOPPER FRUIT CLASSIFIER STICKER 70-90
V0170 MALE ADAPTOR
V0176 MDB EXTENSION 350 mm
V0177 CLEANING STICKER ZV25
V0227 JUICE TRAY WASHER Z14
V0230 RED WIRE CLAMP
2. ACCESSORIES
The machine has the following accessories which are not included as standard:
 To squeeze large oranges with a diameter of 70-90 mm, you need to buy:
- 2 1405006 LARGE CUP
- 2 1405022 LARGE SQUEEZER
- 1 1403006 70-90 mm SEPARATOR
 You can replace the base cups with wheel mounts.
 Cup dispenser Ø73-74 to use 250cc cups.
 There are adhesives available for the sides of the machine.
 You can connect a bill (note) scanner.
 You can connect a credit card scanner.
 You can connect a printer (diagram 24.2, J15).
 You can connect a telephone modem to send SMS messages on the status of the machine
(diagram 24.2, J16).
 A connection kit can be fitted to provide a water inlet and outlet.