Page 20 For technical questions, please call 1-888-866-5797. Item 64576
SAFETY MAINTENANCESETUP OPERATIONOVERVIEW
Select a maximum of four items at a time and touch
OK to view the merged waveforms as shown below�
• Save: Touch to save the current data in
text format� All reports are saved under the
Diagnostic Report tab in Job Menu > Report�
• Record: Touch to record diagnostic data
for playback and analysis later as shown below�
Touch the Stop button to stop recording
the data stream and save the file�
The system uses the following saved file
naming convention: File name includes
vehicle type, product S/N, date, and record
starting time� Make sure the record starting
time is accurate to help identify files�
All files are saved under the Diagnostic
Record tab in Job Menu > Report� Refer to
the Report section on page 21 for further
information on playback operations�
Viewing Diagnostic History Demo
1� When a vehicle diagnosis is performed, the
Scanner Tablet records the detailed diagnostic
information� The History function allows
access to previously tested vehicle records�
Testing can be continued from the previous
operation without starting from scratch�
2� Touch History on the Vehicle Selection Screen
Toolbar to display all the diagnostic records
from previously tested vehicles listed by date�
Touch on the desired record to view the details
of the last Vehicle Diagnostic Report�
On-Screen Buttons
• Delete: To delete any particular diagnostic
record, select its check box and touch Delete�
• Select All: To delete all diagnostic records,
touch Select All and then Delete�
• Quick Access: Touch this button on the
desired record to enter the Test Selection
screen of that record's last diagnostic
operation� Select the desired option to
continue from the previous operation�
To Next Page
Loading...