Page 22 For technical questions, please call 1-888-866-5797. Item 64576
SAFETY MAINTENANCESETUP OPERATIONOVERVIEW
Profile
This function is used to view and enter or modify
personal information�
1� Touch the Profile icon in the Job
Menu to enter the Profile screen�
2� Touch the desired selection in the Profile
column on the left to make modifications�
Note: The Username cannot be altered�
Settings
Use this function to manage the Vehicle
Communication Interface connector, select units of
measurement, upgrade firmware, enter or modify
shop information, and log in or out of the system�
1� Touch the Settings icon in the Job
Menu to enter the Settings screen�
2� Touch the desired selection in the Settings
column on the left to make modifications�
• My VCI: Use to manage all activated
VCI connectors� If more than one VCI
connector is activated on the unit, a list of
connectors will display on the screen� If
a connector linked to another account is
selected, it will be necessary to log out and
input the correct account to continue�
• Units of Measurement: Use to
set the measurement unit, Metric
System or English System�
• Activate VCI: Input the Serial Number
and Activation Code, then touch
Activate to activate the connector�
• Firmware Fix: Use to upgrade and fix diagnostic
firmware� During upgrade, do not perform
other operations, switch to other interfaces,
or cut off power to the VCI connector�
• Shop Information: Use to view and enter
or modify workshop information� Saved
information is automatically generated
each time the diagnostic report is saved�
• About: Displays information on the
product name and software version�
• Exit from Current Account/Login: To
log out of the current login ID, touch
Exit from current account� Touch
Login to log back into the system�
To Next Page
Loading...