ZyXEL Communications AMG1001-T Series User Manual

1/2  Copyright © 2013 ZyXEL Communications Corp. All Rights Reserved
Quick Start Guide
AMG1001-T Series
ADSL2+ 1-port Gateway
AMG1011-T Series
ADSL2+ 1-port USB
4
2
3
1
Hardware Installation
ON
POWER
Connect using the gray
telephone cable.
Connect using the yellow
Ethernet cable.
Connect power and turn on.
Connect using a USB
cable.
PHONE JACK
POWER
4
ETHERNET
DSL
USB
1
2
3
5
5
Check LEDs.
Optional
Internet is ready.
Internet is not ready. Go to Internet Setup.
POWER
ON
INTERNET
OFF
DSL
ON
INTERNET
ON
POWER
ON
DSL
ON
Optional
7109504577

ZyXEL Communications AMG1001-T Series Specifications

General

Brand	ZyXEL Communications
Model	AMG1001-T Series
Category	Gateway
Language	English

Summary

Hardware Installation

Connect Telephone Cable

Connect the gateway to the phone jack using the gray telephone cable.

Connect Ethernet Cable

Connect the gateway to a computer using the yellow Ethernet cable.

Connect USB Cable (Optional)

Optionally connect the gateway to a computer using a USB cable.

Connect Power

Connect the power adapter and turn on the gateway.

Check Status LEDs

Verify the status of the POWER, DSL, and INTERNET LEDs.

Internet Setup

Access Web Interface

Enter the gateway's IP address into a web browser.

Login and Wizard Setup

Log in with username and password, then follow the setup wizard.

USB Driver Installation

Install USB Driver

Install the USB driver from the CD for Windows XP/Vista/7/8.

Declarations

Environmental Product Declaration

Environmental product declaration for the device.

Declaration of Conformity

Formal declaration of product compliance with directives and standards.