To Next PageTo Next Page
Need help?Do you have a question about the ZyXEL Communications AMG1302-T series and is the answer not in the manual?
General| Frequency Bands | 2.4 GHz |
|---|---|
| Maximum Wireless Speed | 300 Mbps |
| NAT | Yes |
| DHCP Server | Yes |
| Device Type | ADSL2+ Gateway |
| ADSL Standards | ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt) Annex A, ITU G.992.2 (G.lite) Annex A, ITU G.994.1 (G.hs), ITU G.992.3 (G.adsl2) Annex A, ITU G.992.5 (G.adsl2+) Annex A |
| Wireless Standard | 802.11 b/g/n |
| LAN Ports | 4 x 10/100 Mbps Ethernet |
| Security | WEP, WPA |
| Antenna | 2 x External |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
Details the procedure for resetting the device to factory defaults.
Guides the user through the steps of configuring internet and wireless settings.
Tutorial on setting up the DSL internet connection.
Guide to setting up a secure wireless network using WPS or manual configuration.
How to configure MAC address filtering for wireless internet access.
Steps for setting up NAT forwarding, particularly for game servers.
Tutorial on configuring firewall rules to allow specific services.
Guide on configuring static routes for network routing.
Tutorial on configuring Quality of Service (QoS) to prioritize traffic.
Instructions for accessing the device from the internet using DDNS.
Screen for configuring WAN settings for internet access.
Configuration of general wireless settings like SSID and security mode.
Configuration for MAC address filtering to control wireless access.
Setup and configuration of WiFi Protected Setup (WPS).
Screen for setting up LAN IP address, subnet mask, and DHCP.
Assigning static IP addresses to specific computers based on MAC addresses.
Screen for viewing and configuring IP static route rules.
Screen for viewing and configuring IPv6 static route rules.
Enables QoS and sets upstream bandwidth.
Configures QoS queue assignment disciplines and priorities.
Configures QoS classifiers to group traffic by criteria.
Activates or deactivates NAT for the default WAN connection.
Configures forwarding of incoming service requests to local servers.
Configures a default server for DMZ to allow packets from specific WAN connections.
Activates port binding and sets up port binding groups.
Screen for setting up port binding groups.
Screen for changing the device's DDNS settings.
Screen for creating and applying IP and MAC filter rules.
Screen for creating and applying IPv6 and MAC filter rules.
Selects the firewall protection level for the device.
Sets the default action for packets not matching firewall rules.
Views and configures firewall rules.
Enables protection against Denial of Service (DoS) attacks.
Screen for enabling parental control, viewing rules, and schedules.
Importing trusted certification authority certificates.
Viewing system logs for selected categories.
Viewing WAN traffic statistics.
Viewing LAN traffic statistics.
Viewing NAT status of the device's clients.
Screen for configuring system passwords.
Configuring the device to be managed by a management server.
Screen for configuring system administrator password.
Setting the system time and date based on local time zone.
Screen for uploading and initiating the firmware upgrade process.
Allows backing up, restoring, and resetting device configurations.
Configuring web browser access to the device.
Troubleshooting power, hardware connections, and LED behavior.
Troubleshooting issues with accessing and logging into the device.
Troubleshooting problems related to internet access.
