Chapter 4 Tutorials
AMG1302/AMG1202-TSeries User’s Guide
49
Tutorial: NAT Port Forwarding Setup
4.6.1 Port Forwarding
Thomas needs to configure the port settings and IP address on the AMG1302/AMG1202-TSeries.
Traffic should be forwarded to port 666 of the Doom server computer which has an IP address of
192.168.1.34.
Thomas may set up the port settings by configuring the port settings for the Doom server computer
(see Section 11.3 on page 153 for more information).
1 Activate NAT in the Network Setting > NAT > General screen. Click Apply.
2 Click Network Setting > NAT > Port Forwarding. Select PVC0 as the WAN interface and click
Add new rule.
3 Configure the screen with the following values:
D=192.168.1.34
WAN
LAN
port 666
A
To Next Page
Loading...
