Chapter 7 Wireless LAN
AMG1302/AMG1202-TSeries User’s Guide
98
7.3 The More AP Screen
This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the AMG1302/
AMG1202-TSeries.
Click Network Setting > Wireless > More AP. The following screen displays.
Figure 31 Network Setting > Wireless > More AP
The following table describes the labels in this screen.
7.3.1 More AP Edit
Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen.
The following screen displays.
Group Key Update
Timer
The Group Key Update Timer is the rate at which the RADIUS server sends a new
group key out to all clients.
Encryption Select the encryption type for data encryption.
If you choose WPA as the security mode, the AMG1302/AMG1202-TSeries uses TKIP
for data encryption.
If you choose WPA2 as the security mode and enable WPA-PSK Compatible, the
AMG1302/AMG1202-TSeries uses either TKIP and AES (TKIPAES MIX) for data
encryption.
If you choose WPA2 as the security mode but disable WPA-PSK Compatible, the
AMG1302/AMG1202-TSeries uses AES for data encryption.
Table 19 Wireless > General: More Secure: WPA(2) (continued)
LABEL DESCRIPTION
Table 20 Network Setting > Wireless > More AP
LABEL DESCRIPTION
# This is the index number of each SSID profile.
Active This field indicates whether this SSID is active. A yellow bulb signifies that this SSID is active. A
gray bulb signifies that this SSID is not active.
SSID An SSID profile is the set of parameters relating to one of the AMG1302/AMG1202-TSeries’s BSSs.
The SSID (Service Set IDentifier) identifies the Service Set with which a wireless device is
associated.
This field displays the name of the wireless profile on the network. When a wireless client scans for
an AP to associate with, this is the name that is broadcast and seen in the wireless client utility.
Security This field indicates the security mode of the SSID profile.
Modify Click the Edit icon to configure the SSID profile.
To Next Page
Loading...
