AMG1302/AMG1202-TSeries User’s Guide 213
CHAPTER 22
System Settings
22.1 Overview
This chapter shows you how to configure system related settings, such as system time, password,
name, the domain name and the inactivity timeout interval.
22.1.1 What You Can Do in the System Settings Screens
•Use the System screen (Section 22.2 on page 213) to configure system settings.
•Use the Time Setting screen (Section 22.3 on page 213) to set the system time.
22.2 The System Screen
Use this screen to configure system admin password.
Click Maintenance > System to open the screen as shown.
Figure 106 Maintenance > System
The following table describes the labels in this screen.
22.3 The Time Screen
Use this screen to configure the AMG1302/AMG1202-TSeries’s time based on your local time zone.
To change your AMG1302/AMG1202-TSeries’s time and date, click Maintenance > System >
Time Setting. The screen appears as shown.
Table 81 Maintenance > System
LABEL DESCRIPTION
Administrator
Inactivity Timer
Type how many seconds a management session (either via the web configurator) can be
left idle before the session times out and you have to log in again. Very long idle timeouts
may have security risks. A value of "0" means a management session never times out, no
matter how long it has been left idle (not recommended).
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
