ZyXEL Communications AMG1302-T series - Page 214

Chapter 22 System Settings
AMG1302/AMG1202-TSeries User’s Guide
214
Figure 107 Maintenance > System > Time Setting
The following table describes the fields in this screen.
Table 82 Maintenance > System > Time
LABEL DESCRIPTION
Current Date/Time
Current Time This field displays the time and date of your AMG1302/AMG1202-TSeries.
Each time you reload this page, the AMG1302/AMG1202-TSeries synchronizes the time
and date with the time server.
Time and Date Setup
Manual Select this radio button to enter the time and date manually. If you configure a new
time and date, Time Zone and Daylight Saving at the same time, the new time and date
you entered has priority and the Time Zone and Daylight Saving settings do not affect
it.
Current Date/Time This field displays the last updated time (in hh:mm:ss format) from the time server or
the last time configured manually.
When you set Time and Date Setup to Manual, enter the new time in this field and
then click Apply.
Current Time This field displays the last updated date (in yyyy/mm/dd format) from the time server
or the last date configured manually.
When you set Time and Date Setup to Manual, enter the new date in this field and
then click Apply.
Get from Time
Server
Select this radio button to have the AMG1302/AMG1202-TSeries get the time and date
from the time server you specified below.
Time Server
Address 1/2
Enter the IP address or URL (up to 20 extended ASCII characters in length) of your time
server. Check with your ISP/network administrator if you are unsure of this information.
Time Zone Setup
Time Zone Choose the time zone of your location. This will set the time difference between your
time zone and Greenwich Mean Time (GMT).