Go to the ZyWALL/USG Monitor > Log, you will see [crit] log message such as
below.
Monitor > Log
What Could Go Wrong?
If you are not be able to configure any IDP policies or it’s not working, there are
two possible reasons:
You have not subscribed for the IDP service.
You have subscribed for the IDP service but the license is expired.
You can click the link from the CONFIGURATION > Licensing > Registration screen
of your ZyXEL device’s Web Configurator or click the myZyXEL.com 2.0 icon from
the portal page (https://portal.myzyxel.com/) to register or extend your
Application Patrol license.
To Next Page
Loading...
