Need help?Do you have a question about the ZyXEL Communications ZyWall ATP series and is the answer not in the manual?
General| Brand | ZyXEL Communications |
|---|---|
| Model | ZyWall ATP series |
| Category | Firewall |
| Language | English |
Details how to register your Zyxel Device and manage subscription services at myZyxel.
Explains the requirements for using the Web Configurator and how to access it.
Provides step-by-step instructions for accessing the Zyxel Device's Web Configurator.
Sets up WAN interfaces, including encapsulation and IP address assignment.
Configures IP address settings for Ethernet WAN connections when static IP assignment is selected.
Covers ISP parameters for PPPoE connections, including service name and authentication type.
Details ISP parameters and PPTP configuration for Internet access.
Explains ISP parameters and L2TP configuration for Internet access.
Guides through configuring a second WAN interface if two ISPs are selected.
Instructions on registering the Zyxel Device at portal.myzyxel.com.
Details how to register for and activate services supported by the model after device registration.
Allows enabling or disabling various features like Botnet Filter, Anti-Malware, and IDP.
Configures SSID and wireless security settings, including pre-shared key and hidden SSID.
Provides instructions for mounting the Zyxel Device, including rack-mounting and wall-mounting.
Guides users through configuring an interface to connect to the Internet.
Provides wizards to create Virtual Private Network (VPN) rules for secure connections.
Sets up VPN rules that the Zyxel Device IPSec VPN Client can retrieve.
Guides users through setting up an L2TP VPN rule.
Checks security status information about the Zyxel Device related to advanced threat protection.
Displays packet statistics for each Gigabit Ethernet port.
Lists all Zyxel Device interfaces and gives packet statistics for them.
Lists devices that received IP addresses from Zyxel Device interfaces with IP/MAC binding enabled.
Displays lists of APs connected to the Zyxel Device, including status and configuration details.
Displays and manages active IPSec SAs.
Tracks users currently logged into the VPN SSL client portal and allows session management.
Displays content filter statistics.
Manages the use of various applications on the network through application patrol.
Displays anti-malware statistics.
Displays IDP (Intrusion Detection and Prevention) statistics.
Manages email security policies and scans for spam.
Displays anti-botnet statistics.
Displays sandboxing statistics.
Decrypts SSL traffic for inspection and re-encrypts it.
Explains how to update the signature packages for services like IDP and application patrol.
Manages all APs connected to the Zyxel Device.
Covers PPPoE, PPTP, or L2TP Internet connections.
Configures settings for Internet connections through a connected mobile broadband card.
Configures tunnel interfaces for GRE, IPv6 in IPv4, and 6to4 tunnels.
Divides a physical network into multiple logical networks using VLANs.
Encrypts or decrypts IPv4 traffic from or to the interface according to the IP routing table.
Explains how to use policy and static routes to override default routing for packet forwarding.
Allows viewing configured policy routes and managing policy routing bandwidth.
Displays configured static routes for propagating routing information to other routers.
Allows adding a domain name or editing its configuration.
Provides a summary of NAT rules and allows creating, editing, or removing rules.
Ensures intended devices use privileged IP addresses by binding IP to MAC addresses.
Allows adding a domain name for load balancing between specified interfaces.
Lists VPN connection policies, associated VPN gateways, and various settings.
Displays IPSec VPN gateway policies, Zyxel Device address, and remote IPSec router address.
Configures who can retrieve VPN rule settings using the Zyxel Device IPSec VPN Client.
Lists configured SSL access policies and allows configuration of SSL access policies.
Configures the Zyxel Device’s L2TP VPN settings.
Controls bandwidth allocation for TCP and UDP traffic using various criteria.
Details the Zyxel Device configuration steps required to use SSO.
Enables or disables Security Policy, asymmetrical routes, sets session limits, and displays policies.
Customizes action and log settings for application patrol signatures and links profiles to policies.
Enables content filtering, views policies, creates denial messages, and checks external web filtering service status.
Turns anti-malware on/off, checks signature status, and sets up black/white lists for malware patterns.
Enables botnet filtering and specifies actions for suspicious activity or C&C server connections.
Allows creation, editing, and saving of custom signatures for new or specific attacks.
Enables sandboxing and specifies actions for detected malicious or suspicious files.
Turns email security on/off, manages policies, and selects actions for mail sessions.
Provides pre-configured certificate, action, and log settings for SSL Inspection.
Provides easier deployment, higher reliability, and faster failover compared to Device HA.
A security analytics portal that collects and analyzes logs for threat identification and reporting.
Starts or stops data collection and views statistics, with options to email reports.
Controls log messages and alerts, including emailing, USB storage, and remote syslog.
Checks current firmware version and uploads firmware to the Zyxel Device.
Captures network traffic going through Zyxel Device interfaces for analysis.
Resets the Zyxel Device to its factory-default settings.
To Next Page
