Chapter 37 System
ZyWALL ATP Series User’s Guide
748
37.17.3 Zyxel One Network (ZON) System Screen
Enable ZDP (ZON) and Smart Connect (Ethernet Neighbor) in the System > ZON screen.
See Monitor > System Status > Ethernet Neighbor for information on using Smart Connect (Link Layer
Discovery Protocol (LLDP)) for discovering and configuring LLDP-aware devices in the same broadcast
domain as the Zyxel Device that you’re logged into using the web configurator.
The following figure shows the System > ZON screen.
Figure 515 Configuration > System > ZON
The following table describes the labels in this screen.
Table 332 Configuration > System > ZON
LABEL DESCRIPTION
ZDP Zyxel Discovery Protocol (ZDP) is the protocol that the Zyxel One Network (ZON) utility uses
for discovering and configuring ZDP-aware Zyxel devices in the same broadcast domain
as the computer on which ZON is installed.
Enable Select to activate ZDP discovery on the Zyxel Device.
Smart Connect Smart Connect uses Link Layer Discovery Protocol (LLDP) for discovering and configuring
LLDP-aware devices in the same broadcast domain as the Zyxel Device that you’re
logged into using the web configurator.
Enable Select to activate LLDP discovery on the Zyxel Device. See also Monitor > System Status >
Ethernet Discovery.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
