Chapter 6 Monitor
ZyWALL ATP Series User’s Guide
127
6.7 IGMP Statistics
The Internet Group Management Protocol (IGMP) Statistics is used by Zyxel Device IP hosts to inform
adjacent router about multicast group memberships. It can also be used for one-to-many networking
applications such as online streaming video and gaming, distribution of company newsletters, updating
address book of mobile computer users in the field allowing more efficient use of resources when
supporting these types of applications. Click Monitor > System Status > IGMP Statistics to open the
following screen.
Figure 103 Monitor > System Status > IGMP Statistics
The following table describes the labels in this screen.
Acct. Status For a captive portal login, this field displays the accounting status of the account used to
log into the Zyxel Device.
Accounting-on means accounting is being performed for the user login.
Accounting-off means accounting has stopped for this user login.
A “-” displays if accounting is not enabled for this login.
RADIUS Profile Name This field displays the name of the RADIUS profile used to authenticate the login through
the captive portal. N/A displays for logins that do not use the captive portal and RADIUS
server authentication.
Refresh Click this button to update the information in the screen.
Table 32 Monitor > System Status > Login Users (continued)
LABEL DESCRIPTION
Table 33 Monitor > System Status > IGMP Statistics
LABEL DESCRIPTION
# This field is a sequential value, and it is not associated with a specific I GMP Statistics.
Group This field displays the group of devices in the IGMP.
Source IP This field displays the host source IP information of the IGMP.
Incoming Interface This field displays the incoming interface that’s connected on the IGMP.
Packet Count This field displays the packet size of the data being transferred.
Bytes This field displays the size of the data being transferred in Byes.
Outgoing Interface This field displays the outgoing interface that’s connected on the IGMP.
Refresh Click this button to update the information in the screen.
To Next Page
Loading...
