Chapter 13 Redirect Service
ZyWALL ATP Series User’s Guide
344
13.2.1 The Redirect Service Edit Screen
Click Network > Redirect Service to open the Redirect Service screen. Then click the Add or Edit icon to
open the Redirect Service Edit screen where you can configure the rule.
Figure 235 Network > Redirect Service > Edit
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Service This is the name of the service: HTTP or SMTP.
Name This is the descriptive name of a rule.
User/Group This is the user account or user group name to which this rule is applied.
Interface This is the interface on which the request must be received.
Source Address This is the name of the source IP address object from which the traffic should be sent. If any
displays, the rule is effective for every source.
Server This is the IP address of the HTTP proxy server or the SMTP server to which the matched traffic
is forwarded.
Port This is the service port number used by the HTTP proxy server or SMTP server.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Table 139 Configuration > Network > Redirect Service (continued)
LABEL DESCRIPTION
To Next Page
Loading...
