ZyXEL Communications ZyWall ATP series - Language Screen; Ipv6 Screen

Chapter 37 System
ZyWALL ATP Series User’s Guide
743
37.15 Language Screen
Click Configuration > System > Language to open the following screen. Use this screen to select a
display language for the Zyxel Device’s Web Configurator screens.
Figure 508 Configuration > System > Language
The following table describes the labels in this screen.
37.16 IPv6 Screen
Click Configuration > System > IPv6 to open the following screen. Use this screen to enable IPv6 support
for the Zyxel Device’s Web Configurator screens.
Figure 509 Configuration > System > IPv6
Table 328 Configuration > System > Language
LABEL DESCRIPTION
Language Setting Select a display language for the Zyxel Device’s Web Configurator screens. You also
need to open a new browser session to display the screens in the new language.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.