ZyXEL Communications ZyWall ATP series - Apply to a Security Policy

Chapter 33 SSL Inspection
ZyWALL ATP Series User’s Guide
569
33.2.1 Apply to a Security Policy
Click the icon in the Action field to apply the entry to a security policy.
Go to the Configuration > Security Policy > Policy Control screen to check the result.
Remove Select an entry and click this to delete it.
References Select an entry and click References to open a screen that shows which settings use the
entry. Click Refresh to update information on this screen.
# This is the entry’s index number in the list.
Name This displays the name of the profile.
Description This displays the description of the profile.
CA Certificate This displays the CA certificate being used in this profile.
Reference This displays the number of times an object reference is used in a profile.
Action Click this icon to apply the entry to a security policy.
Go to the Configuration > Security Policy > Policy Control screen to check the result.
Table 227 Configuration > Security Service > SSL Inspection > Profile (continued)
LABEL DESCRIPTION