Chapter 5 Dashboard
ZyWALL ATP Series User’s Guide
109
This table describes the fields in the above screen.
5.2.6 DHCP Table Screen
Click on the number to look at the IP addresses currently assigned to DHCP clients and the IP addresses
reserved for specific MAC addresses. The following screen will show.
Figure 91 Dashboard > DHCP Table
This table describes the fields in the above screen.
Table 22 .Dashboard > System Resources
LABEL DESCRIPTION
CPU Usage This field displays what percentage of the Zyxel Device’s processing capability is
currently being used. Hover your cursor over this field to display the Show CPU Usage
icon that takes you to a chart of the Zyxel Device’s recent CPU usage.
Memory Usage This field displays what percentage of the Zyxel Device’s RAM is currently being used.
Hover your cursor over this field to display the Show Memory Usage icon that takes
you to a chart of the Zyxel Device’s recent memory usage.
Flash Usage This field displays what percentage of the Zyxel Device’s onboard flash memory is
currently being used.
USB Storage Usage This field shows how much storage in the USB device connected to the Zyxel Device
is in use.
Active Sessions This field shows how many sessions, established and non-established, that pass
through/from/to/within the ZyWALL. Hover your cursor over this field to display icons.
Click the Detail icon to go to the Session Monitor screen to see details about the
active sessions. Click the Show Active Sessions icon to display a chart of Zyxel
Device’s recent session usage.
Table 23 Dashboard > DHCP Table
LABEL DESCRIPTION
Refresh Interval Select how often you want this window to be updated automatically.
Refresh Now Click this to update the information in the window right away.
# This field is a sequential value, and it is not associated with a specific entry.
Interface This field identifies the interface that assigned an IP address to a DHCP client.
To Next Page
Loading...
