Chapter 40 Diagnostics
ZyWALL ATP Series User’s Guide
781
40.3 The Packet Capture Screen
Use this screen to capture network traffic going through the Zyxel Device’s interfaces. Studying these
packet captures may help you identify network problems. Click Maintenance > Diagnostics > Packet
Capture to open the packet capture screen.
Note: New capture files overwrite existing files of the same name. Change the File Suffix field’s
setting to avoid this.
Figure 540 Maintenance > Diagnostics > Packet Capture
The following table describes the labels in this screen.
File Name This column displays the label that identifies the file.
Size This column displays the size (in bytes) of a file.
Last Modified This column displays the date and time that the individual files were saved.
Table 346 Maintenance > Diagnostics > Files (continued)
LABEL DESCRIPTION
Table 347 Maintenance > Diagnostics > Packet Capture
LABEL DESCRIPTION
Interfaces Enabled interfaces (except for virtual interfaces) appear under Available Interfaces.
Select interfaces for which to capture packets and click the right arrow button to move
them to the Capture Interfaces list. Use the [Shift] and/or [Ctrl] key to select multiple
objects.
IP Version Select the version of IP for which to capture packets. Select any to capture packets for
all IP versions.
To Next Page
Loading...
