Chapter 6 Monitor
ZyWALL ATP Series User’s Guide
126
6.6 The Login Users Screen
Use this screen to look at a list of the users currently logged into the Zyxel Device. To access this screen,
click Monitor > System Status >
Login Users.
Figure 102 Monitor > System Status > Login Users
The following table describes the labels in this screen.
Table 32 Monitor > System Status > Login Users
LABEL DESCRIPTION
Force Logout Select a user ID and click this icon to end a user’s session.
# This field is a sequential value and is not associated with any entry.
User ID This field displays the user name of each user who is currently logged in to the Zyxel
Device.
Reauth/Lease Time This field displays the amount of reauthentication time remaining and the amount of
lease time remaining for each user.
Session Timeout This field displays the total account of time the account (authenticated by an external
server) can use to log into the Zyxel Device or access the Internet through the Zyxel
Device.
This shows unlimited for an administrator account.
Type This field displays the way the user logged in to the Zyxel Device.
IP Address This field displays the IP address of the computer used to log in to the Zyxel Device.
Country The Internet Assigned Numbers Authority (IANA) has reserved the following blocks of
Private IP addresses specifically for private networks:
• 10.0.0.0-10.255.255.255
• 172.16.0.0-172.31.255.255
• 192.168.0.0-192.168.255.255
• 224.0.0.0-239.255.255.255
MAC This field displays the MAC address of the computer used to log in to the Zyxel Device.
User Info This field displays the types of user accounts the Zyxel Device uses. If the user type is ext-
user (external user), this field will show its external-group information when you move your
mouse over it.
If the external user matches two external-group objects, both external-group object
names will be shown.
To Next Page
Loading...
