ZyXEL Communications ZyWall ATP series - CHAPTER 35 Device HA; 35.1 Device HA Overview; 35.2 Device HA Status

ZyWALL USG Series User’s Guide
675
CHAPTER 35
Device HA
35.1 Device HA Overview
Device HA lets a backup (or passive) Zyxel Device (B) automatically take over if the master (or active)
Zyxel Device (A) fails.
Figure 445 Device HA Backup Taking Over for the Master
35.1.1 What You Can Do in These Screens
• Use the Device HA Status screen (Section 35.2 on page 675) to see the license status for Device HA
Pro, and see the status of the active and passive devices.
• Use the Device HA Pro screen (Section 35.3 on page 677) to configure Device HA Pro global settings,
monitored interfaces and synchronization settings.
• Use the View Log screen (Section 35.4 on page 680) to see logs of the active and passive devices.
35.2 Device HA Status
Use this screen to view Device HA Pro license status and details on the active and passive Zyxel Devices.
Go to Configuration > Device HA > Device HA Status to view the following screen.