EasyManua.ls Logo

ZyXEL Communications ZyWall ATP series - Page 674

ZyXEL Communications ZyWall ATP series
852 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 34 Object
ZyWALL ATP Series User’s Guide
674
The following table describes the labels in this screen.
Table 293 Configuration > DHCPv6 > Lease > Add/Edit
LABEL DESCRIPTION
Name Type the name for this lease object. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This value is case-
sensitive.
Lease Type Select the lease type for this lease object. You can choose from Prefix Delegation, DNS
Server, Address, Address Pool, NTP Server, or SIP Server.
Interface Select the interface for this lease object.
DUID If you select Prefix Delegation or Address in the Lease Type field, enter the DUID of the
interface.
Address If you select Address in the Lease Type field, enter the IP address of the DHCPv6 server.
Prefix If you select Prefix Delegation or Address in the Lease Type field, enter the IPv6 prefix of the
interface.
DNS Server If you select DNS Server in the Lease Type field, select a request object or User Defined in the
DNS Server field and enter the IP address of the DNS server in the User Defined Address field
below.
Starting IP Address If you select Address Pool in the Lease Type field, enter the first of the contiguous addresses
in the IP address pool.
End IP Address If you select Address Pool in the Lease Type field, enter the last of the contiguous addresses
in the IP address pool.
NTP Server If you select NTP Server in the Lease Type field, select a request object or User Defined in the
NTP Server field and enter the IP address of the NTP server in the User Defined Address field
below.
SIP Server If you select SIP Server in the Lease Type field, select a request object or User Defined in the
SIP field and enter the IP address of the SIP server in the User Defined Address field below.
User Defined
Address
If you select DNS Server, NTP Server, or SIP Server as your lease type, you must enter the IP
address of the server your selected.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.

Table of Contents

Other manuals for ZyXEL Communications ZyWall ATP series

Related product manuals