ZyXEL Communications ZyWall ATP series - The Wireless Frame Capture Files Screen

ZyWALL ATP Series User’s Guide
793
40.9.1 The Wireless Frame Capture Files Screen
Click Maintenance > Diagnostics > Wireless Frame Capture > Files to open this screen. This screen lists the
files of wireless frame captures the Zyxel Device has performed. You can download the files to your
computer where you can study them using a packet analyzer (also known as a network or protocol
analyzer) such as Wireshark.
Figure 550 Maintenance > Diagnostics > Wireless Frame Capture > Files
The following table describes the labels in this screen.
Table 355 Maintenance > Diagnostics > Wireless Frame Capture > Files
LABEL DESCRIPTION
Remove Select files and click Remove to delete them from the Zyxel Device. Use the [Shift] and/or [Ctrl] key
to select multiple files. A pop-up window asks you to confirm that you want to delete.
Download Click a file to select it and click Download to save it to your computer.
# This column displays the number for each packet capture file entry. The total number of packet
capture files that you can save depends on the file sizes and the available flash storage space.
File Name This column displays the label that identifies the file. The file name format is interface name-file
suffix.cap.
Size This column displays the size (in bytes) of a configuration file.
Last Modified This column displays the date and time that the individual files were saved.