ZyXEL Communications ZyWall ATP series - Run the ZON Utility

Chapter 37 System
ZyWALL ATP Series User’s Guide
745
37.17.2 Run the ZON Utility
1 Double-click the ZON Utility to run it.
2 The first time you run the ZON Utility you will see if your Zyxel Device and firmware version support the ZON
Utility. Click the OK button to close this screen.
Figure 510 Supported Devices and Versions
If you want to check the supported models and firmware versions later, you can click the Show
information about ZON icon in the upper right hand corner of the screen. Then select the Supported
model and firmware version link. If your device is not listed here, see the device release notes for ZON
utility support. The release notes are in the firmware zip file on the Zyxel web site.
Figure 511 ZON Utility Screen
3 Select a network adapter to which your supported devices are connected.