Set Up the Available Bandwidth on WAN2 Interfaces on the
ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > Interface > Ethernet > WAN2 > Egress
Bandwidth and enter the available bandwidth (512 kbps) in the Egress Bandwidth
field. Click OK.
CONFIGURATION > Interface > Ethernet > WAN2
Set Up the WAN Trunk on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > Interface > Trunk > User
Configuration > Add Trunk. Configure a Name for you to identify the Trunk profile
and set the Load Balancing Algorithm field to be the Weighted Round Robin.
Add WAN1 and enter 2 in the Weight column. Add WAN2 and enter 1 in the
Weight column. Click OK to return to the Configuration screen.
To Next Page
Loading...
