ZyXEL Communications ATP800 - Page 629

629/810
www.zyxel.com
Leave the Incoming Interface to any and select the Outgoing Interface to be
WAN1. Select Service Type to be the Service Object and select FTP from the list
box.
Set the Guaranteed Bandwidth Inbound to 150 (kbps) and set Priority 5. Set the
Maximum to 200 (kbps). Set the Guaranteed Bandwidth Outbound to 150 (kbps)
and set Priority 5. Set the Maximum to 200 (kbps). Click OK to return to the
General screen.
CONFIGURATION > BWM > Configuration > Add Policy
Note: In Bandwidth Shaping, the highest priority is (1) the lowest priority is (7).