How to Get Started Using the Wizards
When you log into the Web Configurator for the first time or when you reset the
ZyWALL/USG to its default configuration, the Installation Setup Wizard screen
displays. This is an example of using ZyWALL/USG Wizards to configure Internet
connection settings, wireless settings and device registration services.
ZyWALL/USG with Installation Setup Wizard Example
Set Up the Internet Access (Ethernet) Wizard on the
ZyWALL/USG
In the ZyWALL/USG Installation Setup Wizard Welcome page, click Next to start
configuring. Click the double arrow in the upper right corner to display (≪
Note: You need internet access to activate your ZyWALL/USG subscription services. This
example was tested using USG310 (Firmware Version: ZLD 4.25).
To Next Page
Loading...
