IPSubnetting VLAN
All contents copyright (c) 2007 ZyXEL Communications Corporation.
6
9. Create VLAN 4, include port 1 and port 2. Port 1 connects to the modem and
packets going in and out this port shouldn’t have VLAN tag. Port 2 connects to the
router in the CO, and packets going in and out port 2 should have different VLAN tags
according to its IP address. Click “Add”.
10. Create VLAN 5, include port 1 and port 2. Port 1 connects to the modem and
packets going in and out this port shouldn’t have VLAN tag. Port 2 connects to the
router in the CO, and packets going in and out port 2 should have different VLAN tags
according to its IP address. Click “Add”.
To Next Page
Loading...
