Need help?Do you have a question about the ZyXEL Communications DX3301-T0 and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| MIMO type | Multi User MIMO |
| Networking standards | IEEE 802.1Q |
| Ethernet LAN data rates | 1000 Mbit/s |
| Maximum data transfer rate | - Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| SIM card slot | No |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Top Wi-Fi standard | Wi-Fi 6 (802.11ax) |
| Mobile network generation | - |
| USB 2.0 ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 4 |
| Voice codecs | G.711a, G.722, G.726, G.729 |
| Product type | Tabletop router |
| Product color | White |
| LED indicators | LAN, Power, WAN, WLAN, WPS |
| Power source type | DC |
| Storage temperature (T-T) | -30 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 10 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 35 mm |
|---|---|
| Width | 220 mm |
| Height | 153 mm |
| Weight | 387 g |
Provides an overview of the Zyxel Device models and their features.
Details the Zyxel Device LED indicators and their behaviors.
Describes how to reload factory default settings using the RESET button.
Introduces the Web Configurator as an HTML-based management interface.
Provides step-by-step instructions to access the Web Configurator.
Guides the user through the initial setup process for time zone and wireless networks.
Details on selecting the Internet connection mode and troubleshooting connection issues.
Instructions on how to set up a wired Internet connection.
Guides on setting up a WiFi network for Internet access.
Covers configuring Firewall rules, Parental Control, and MAC Filter.
Details on upgrading firmware, backing up, and restoring device configuration.
Describes MPro Mesh network features like AP and Band Steering.
Details on setting up MPro Mesh Router with an Extender via WiFi or wired connection.
Explains managing Zyxel Device and WiFi settings via the MPro Mesh app.
Overview of the Connection Status screen for Internet and wireless settings.
Enables or disables the main wireless network and configures SSIDs and passwords.
View the number of parental control profiles and access restricted access schedules.
Guides on creating a profile to block Internet access for specific devices.
Discusses Broadband screens for configuring Zyxel Device for Internet access.
Configure Internet access settings for DSL routers.
Configure Internet access settings for Ethernet, AON, and PON routers.
Configure cellular WAN connection as a backup for wired connections.
Describes Network Setting > Wireless screens for WiFi setup and security.
Enables Wireless LAN, sets SSID, and selects security mode.
Configures guest wireless networks, allowing Internet access via Zyxel Device.
Allows or denies WiFi clients access based on MAC addresses.
Configures WiFi Protected Setup (WPS) for quick wireless network setup.
Enables or disables MPro Mesh for MPro Mesh-supported devices.
Sets the Local Area Network IP address and subnet mask, and configures DHCP.
Assigns fixed IP addresses to individual computers based on MAC addresses.
Explains how the Zyxel Device uses static routes for outbound traffic.
View and configure static route rules for saving time and bandwidth.
Overrides default behavior to route packets based on criteria like source address.
Defines Quality of Service and its role in network performance.
Enables QoS and sets upstream bandwidth or traffic priority.
Configures QoS queue assignment to prioritize traffic on WAN or LAN interfaces.
Explains Network Address Translation (NAT) and its function.
Forwards incoming service requests from the Internet to servers on the local network.
Explains how to enable the Zyxel Device firewall to protect against attacks.
Use the firewall to protect the Zyxel Device and network from hackers.
Activates protection against Denial of Service (DoS) attacks.
Enables MAC Address Filter and adds host/MAC addresses to allow or deny access.
Configures URL filtering settings to block users from accessing certain websites.
Limits user Internet access time and prevents access to inappropriate content.
Enables parental control and defines rules/schedules for time-limited Internet access.
Sets up a SIP account for outgoing VoIP calls and incoming call matching.
Creates or manages user accounts and their privileges.
Configures interfaces for remote access and specifies service port numbers.
Configures SNMP agent, community strings, system name, and location.
Configures log destination (remote syslog or local file) and types.
Explains how to upload new firmware to enhance device performance.
Uploads new firmware via HTTP, or checks and downloads online.
Backs up current configuration to computer or restores saved configuration.
Displays information to help identify problems with the Zyxel Device.
Offers suggestions to solve potential problems encountered with the Zyxel Device.
Troubleshoots issues related to device power and hardware behavior.
Addresses issues with knowing the IP address, forgetting passwords, or accessing Web Configurator.
Troubleshoots issues related to accessing the Internet or specific connection types.
Addresses issues with slow or intermittent WiFi connections.
Troubleshoots issues where the Zyxel Device fails to detect a USB device.
To Next Page
