ZyXEL Communications DX3301-T0 - Setting up an Mpro Mesh Router and Mpro Mesh Extender with a Wifi Connection

Chapter 6 App Tutorials
AX/DX/EX/PX Series User’s Guide
119
Figure 60 Zyxel Device with a WiFi Connection
Configure your non-MPro Mesh Router with an MPro Mesh Extender using a wired connection.
Figure 61 Zyxel Device with a Wired Connection
6.6.1 Setting up an MPro Mesh Router and MPro Mesh Extender with a WiFi
Connection
Follow the steps below to set up your MPro Mesh Router with the Zyxel MPro Mesh Extender.
1 Turn on both devices near each other. Note the power LEDs when you’re done. The power LEDs should
be steady green.
2 Download the app to your smart phone and log into the MPro Mesh Router. You may need to forget
your current WiFi connection on your smartphone.
Table 21 Devices Role
Zyxel Device MPro Mesh Router MPro Mesh Extender
Role Internet Access& Mesh Network Controller Mesh Network Repeater/ AP