Chapter 2 Hardware
AX/DX/EX/PX Series User’s Guide
43
Note: The phone LED is for the Zyxel Device with phone ports only; see Section 1.1 on page 19
for more information.
2.3 Ports Panel
The following shows the Zyxel Device ports panel and connection ports.
2.3.1 EX5501, AX7501 and PX7501
Figure 19 AX7501-B0
Figure 20 EX5501-B0
Figure 21 PX7501-B0
The following table describes the items on the ports panels of EX5501, AX7501 and PX7501.
SFP Green On The SFP port is connected to the ISP’s ONT and the Zyxel Device is
receiving optical signals normally, or the SFP port’s Ethernet WAN
connection is up.
Off The connection to the ISP’s ONT or the Ethernet WAN connection is
down.
Table 10 LED Descriptions (EX5600-T1 / EX5601-T0/ EX5601-T1) (continued)
LED COLOR STATUS DESCRIPTION
Table 11 Panel Ports and Buttons
LABEL DESCRIPTION
2.5G WAN For EX5501
Connect an Ethernet cable to the Ethernet WAN port for Internet access.
FIBER For AX7501-B0
Insert a compatible SFP+ transceiver to the FIBER port and connect the fiber cable for Internet
access.
For PX7501-B0
Connect the fiber cable to the FIBER port for Internet access.
To Next Page
Loading...
