AX/DX/EX/PX Series User’s Guide
379
CHAPTER 33
WLAN Station Status
33.1 WLAN Station Status Overview
Click System Monitor > WLAN Station Status to open the following screen. Use this screen to view
information and status of the wireless stations (wireless clients) that are currently associated with the
Zyxel Device. Being associated means that a WiFi client (for example, your computer with a wireless
network card installed) has connected successfully to an AP (or wireless router) using the same SSID,
channel, and WiFi security settings.
Figure 238 System Monitor > WLAN Station Status
The following table describes the labels in this screen.
Table 151 System Monitor > WLAN Station Status
LABEL DESCRIPTION
Refresh Interval Select how often you want the Zyxel Device to update this screen.
# This is the index number of an associated wireless station.
MAC Address This field displays the MAC address of an associated wireless station.
Rate (Mbps) This field displays the transmission rate of WiFi traffic between an associated wireless station and
the Zyxel Device.
RSSI (dBm) The RSSI (Received Signal Strength Indicator) field shows the WiFi signal strength of the station’s
wireless connection.
The normal range is –30dBm to –79dBm. If the value drops below –80dBm, try moving the
associated wireless station closer to the Zyxel Device to get better signal strength.
To Next Page
Loading...
