Chapter 7 Connection Status
AX/DX/EX/PX Series User’s Guide
139
7.2 Guest WiFi Settings
Use this screen to enable or disable the guest 2.4 GHz and/or 5 GHz wireless networks. When the switch
goes to the right ( ), the function is enabled. Otherwise, it is not. You can check their SSIDs (WiFi
network name) and passwords from this screen. If you want to show or hide your WiFi passwords, click
the Eye icon.
Figure 73 Guest WiFi Settings
Click the Arrow icon ( ) to open the following screen. Use this screen configure the SSIDs and/or
passwords for your guest wireless networks.
WiFi Name The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
WiFi Password If you selected Random Password, this field displays a pre-shared key generated by the Zyxel
Device.
If you did not select Random Password, you can manually type a pre-shared key from 8 to 64
case-sensitive keyboard characters.
Click the Eye icon to show or hide the password for your wireless network. When the Eye icon
is slashed , you will see the password in plain text. Otherwise, it is hidden.
Random Password Select this to have the Zyxel Device automatically generate a password. The WiFi Password
field will not be configurable when you select this option.
Hide WiFi network
name
Select this to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID
through scanning using a site survey tool.
Note: Disable WPS in the Network Setting > Wireless > WPS screen to hide the SSID.
Save Click Save to save your changes.
Table 25 WiFi Settings: Configuration (continued)
LABEL DESCRIPTION
To Next Page
Loading...
