10. Multiple login supported.
11. Multiple management IP supported.
12. Multiple ping/traceroute instances supported.
13. New CLI supported.
14. Multiple configurations supported.
15. System configuration backup / restore in text-mode.
16. DHCP relay and relay agent information (option-82) supported.
17. Read copper/fiber status on web.
18. Multicast
19. MVR
20. IGMP Filtering
21. CIR & PIR
22. Mac Freeze
23. Intrusion Lock
24. Syslog
25. Page support for displaying configuration
26. Reserve multicast group support
27. 802.1s MSTP
28. SNMPv3
29. enlarge syslog buffer
30. 802.3ah OAM
31. Multilevel CLI
32. SNMP trap group
33. configurable multicast VLAN
34. enlarge concurrent telnet session
35. IP source guard(Static binding, DHCP snooping, ARP inspection)
36. Two rate three color marking
37. IP subnet VLAN
38. RADIUS MAC login
39. RADIUS accounting
40. TACACS+ authentication
41. TACACS+ accounting
42. Loop guard
43. Daylight saving
44. Show mac by vlan or port
45. show cpu utilization in new CLI
46. show IGMP snooping Query
Enhanced Features:
1.
Known Issue:
1. Filtering: In some special cases, setting one MAC with discard-source will cause device
filter all packets with this MAC, ether source MAC or destination MAC.
2. When user active LACP and RSTP, sometimes LACP is failed.
3. Many to One Throughput Test failed.
4. Do not support tagged frame forwarding in the Port-Based VLAN.
Bug Fix:
1. Fix the bug that memory leak problem under log-in attack
2. Fix the bug that trunk port on combo port will get error port status
3. Fix the bug that igmp querier packets come from trunk ports will send back to trunk active
port.
4. Fix the bug that setting policy rule with some procedure will let DUT in the infinite loop.
5. Fix the bug that device can't get corret "port status detail" of member when using cluster
manager from WEB.
6. Fix the bug that ssh session don’t release when get error ssh authentication
To Next Page
Loading...
