Dimension GS-1116A/GS-1124A Gigabit Switch
2-2 Hardware Description and Installation
2.2 Rack-mounted Installation
The switch can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with other
equipment. Follow the steps below to mount your switch on a standard EIA rack using the included
rack-mounting kit.
1. Align one bracket with the holes on one side of the switch and secure it with the bracket screws.
Similarly, attach the other bracket.
Figure 2-2 Attaching Mounting Brackets and Screws
2.
After attaching both mounting brackets, position the switch in the rack by lining up the holes in the
brackets with the appropriate holes on the rack. Secure the switch to the rack with the rack’s
mounting screws.
Figure 2-3 Switch Mounting to an EIA Standard 19-inch Rack
To Next Page
Loading...
