Dimension GS-1116A/GS-1124A Gigabit Switch
Hardware Description and Installation 2-5
Figure 2-7 Transceiver Installation Procedure
Transceiver Removal
Use the following steps to remove a mini GBIC transceiver (SFP module) from the GBIC port.
1. Remove the fiber-optic cables from the transceiver.
2. Unlock the transceiver’s latch (latch styles vary).
3. Pull the transceiver out of the slot.
4. Put the transceiver’s dust cover on the transceiver.
To Next Page
Loading...
