ZyXEL Communications NPS-520 - ZyXEL Utility; Accessing the ZyXEL Utility

NPS-520 User’s Guide
21
CHAPTER 2
ZyXEL Utility
This chapter shows you how to use the ZyXEL utility to configure your NPS-520.
2.1 Accessing the ZyXEL Utility
To open the ZyXEL utility, double-click the ZyXEL utility icon ( ) in the system tray or
click Start > (All) Programs > ZyXEL NPS-520 Utility > NPS-520 Utility.
" Click the help icon ( ) (located in the top right corner) to display the online
help window.
2.2 ZyXEL Utility Icon
After you install and start the ZyXEL utility, an icon for the ZyXEL utility appears in the
system tray.
Figure 3 ZyXEL Utility: System Tray Icon
The ZyXEL utility system tray icon indicates the status of the NPS-520. Refer to the following
table for details.
Table 2 ZyXEL Utility: System Tray Icon
ICON DESCRIPTION
The NPS-520 is not powered on or not connected to your computer or network.
The NPS-520 is not connected to a printer or other client computer is using the
printer connected to the NPS-520.
The NPS-520 is powered on and connected to a printer.