Chapter 4 Adding a Printer on Your Computer
NPS-520 User’s Guide
55
Figure 43 Windows 2000: Add Printer Wizard: Local or Network Printer
5 Select Connect to a printer on the Internet or on your intranet and enter the URL of
your NPS-520.
The URL should be in the format of http://address/631/port (where “address” is the IP
address of your NPS-520, “631” is the standard IPP port number and “port” is the name
of a parallel port on the computer for the USB printer, for example, http://
192.168.1.6:631/lpt1. The default port name is "lpt1".
Click Next.
Figure 44 Windows 2000: Add Printer Wizard: Locate Your Printer
6 Select the make of the printer that you want to connect to the NPS-520 in the
Manufacturers list.
7 Select the printer model from the list of Printers.
8 If your printer is not displayed in the list of Printers, you can insert the printer driver
installation CD/disk or download the driver file to your computer, click Have Disk…
and install the new printer driver.
9 Click Next to continue.
To Next Page
Loading...
