ZyXEL Communications NPS-520 - Figure 31 Windows 2000: Add Standard TCP;IP Printer Port Wizard: Add Port; Figure 32 Windows 2000: Add Standard TCP;IP Printer Port Wizard: Port Information

Chapter 4 Adding a Printer on Your Computer
NPS-520 User’s Guide
49
Figure 31 Windows 2000: Add Standard TCP/IP Printer Port Wizard: Add Port
8 Select Custom and then click Settings... to configure the printing protocol and port
settings.
Figure 32 Windows 2000: Add Standard TCP/IP Printer Port Wizard: Port Information
9 Select LPR and set Queue Name to “lpt1” or select Raw and set Port Number to
“9100”. Click OK to go back to the Add Standard TCP/IP Printer Port Wizard (see
Figure 32 on page 49) and then click Next.