Chapter 6 Connection Status
NR/FWA Outdoor Series User’s Guide
68
6.1.5 WiFi Settings
Use this screen to enable or disable the main WiFi network. When the switch turns blue, the function is
enabled. You can use this screen or the QR code on the upper right corner to check the SSIDs (WiFi
network name) and passwords of the main WiFi networks. If you want to show or hide your WiFi
passwords, click the Eye icon ( ).
Note: WiFi of the Zyxel Device is only used for configuration.
Figure 38 WiFi Settings
Click the Arrow icon ( ) to configure the SSIDs and/or passwords for your main WiFi networks. Click the
Eye icon ( ) to display the characters as you enter the WiFi Password.
Scanning the QR code is an alternative way to connect your WiFi client to the WiFi network.
Figure 39 WiFi Settings: Configuration
Each field is described in the following table.
Table 11 WiFi Settings: Configuration
LABEL DESCRIPTION
2.4 GHz WiFi Slide the switch button to enable or disable the 2.4G WiFi network. When the switch turns
blue, the function is enabled.
WiFi Name The SSID (Service Set IDentity) identifies the service set with which a WiFi device is associated.
WiFi devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name for the WiFi. You can use up to 32 printable characters, including
spaces.
To Next Page
Loading...
