Chapter 7 Broadband
NR/FWA Outdoor Series User’s Guide
84
The following table describes the labels in this screen.
After selecting to disable the following warning appears. Click OK to continue.
Figure 54 Network Setting > Broadband > Cellular PLMN > Manual Scan Warning
Click Scan to check for available PLMNs in the area surrounding the Zyxel Device, and then display the
in the network list. Select from the network list and click Apply.
Table 21 Network Setting > Broadband > Cellular PLMN
LABEL DESCRIPTION
PLMN Management
PLMN Auto Selection Slide this to the right to enable and have the Zyxel Device automatically connect to
the first available mobile network.
Select disabled to display the network list and manually select a preferred network.
Cancel Click Cancel to exit this screen without saving.
Apply Click Apply to save your changes back to the Zyxel Device.
To Next Page
Loading...
