ZyXEL Communications NSA210 - About This Users Guide; Intended Audience; Tips for Reading User’s Guides On-Screen; Related Documentation

Chapter 1 Chapter 1 Tytle
1. NAS Starter Utility Installation
After you install a new hard disk on the NSA210, please make sure to use the NAS
Starter Utility to discover and access the NSA210 to assign an IP address by DHCP or
a static IP. The steps are as below.
a. Double click “NSU.exe” file.
b. Click “Next” to begin the installation.
Figure 1. Click “Next”
Figure 2. Enter your information
Figure 3. Select setup type
Figure 4. Click “Install” to start the installation
1
Chapter 1 Applications
3