Chapter 1 Chapter 1 Tytle
g. Please make sure that you have installed the hard disk before installing the
firmware through this screen. NSA210 needs to format the hard disk and install
the firmware. Then upload the latest firmware to NSA210.
Figure 11. Firmware Path Screen.
h. After the above steps and click NSU again, you can find NSA210 has an IP with
status “Up” in the device list. Then you can type this IP in the browser or click the
icon “Admin” to enter the GUI of NSA210.
Figure 12. NSA210 with an IP in the device list.
To Next Page
Loading...
