Chapter 5 Tutorials
Media Server User’s Guide
79
This deletes all existing data in the SATA hard disk. Make sure you have
a backup of any existing data in the hard disk.
The NSA starts creating the volume and you can see the following progress bar. Wait for the RAID 1
volume to be created.
3 The Storage > Volume screen displays with your RAID 1 volume.
5.7 Creating a Volume in a 1-Bay NSA
This section shows you how to create a volume on your 1-bay NSA.
Creating a volume deletes all existing data in the SATA or eSATA hard
disk. Make sure you have a backup of your existing data before following
the steps in this section.
To Next Page
Loading...
