Chapter 8 Storage
Media Server User’s Guide
165
used. For a degraded volume, you should replace the faulty disk as soon as possible to obtain
previous performance. See your Quick Start Guide for more information on replacing a disk.
If it’s down, then the only indication is that you can no longer transfer files to/from the shares in
the down volume. If it’s degraded, then file transfer to/from the shares in the degraded volume will
be slower.
Note: There is no explicit message from CIFS that tells users their volume is degraded or
down.
8.3 Creating an Internal (SATA) Volume
In the Storage screen (Figure 87 on page 163), click the Create an Internal Volume or Create
a SATA Volume button (depending on your model) to open the following screen. Use this screen to
create a new NSA internal disk drive volume.
Note: Creating a volume formats the hard drive. All data on the disk will be lost.
Figure 89 Storage > Create an Internal Volume
To Next Page
Loading...
