Chapter 11 Package Management
Media Server User’s Guide
268
11.11.1 Restore: Step 1
You can access this screen by clicking Protect > Restore.
Figure 168 Protect > Restore: Step 1
The following table describes the labels in this screen.
Table 86 Protect > Restore: Step 1
LABEL DESCRIPTION
Step 1. Select
Restore Source
Select a previous archive backup that you want to restore to the NSA.
Select Remote NSA if the file is in another NSA in the network that you used for your
backup. Fill in the fields below when you choose this option.
Select Internal or External Volume if you want to use another volume in the NSA or an
attached USB hard disk for your backup. Click Browse to select the backup file.
IP Address Enter the address of the NSA you want to use.
User Enter the username you use to access the NSA.
Password Enter the password of your NSA account.
Share Name Enter the name of the share you want to use.
Test Connection Click this to test your connection to the remote NSA that you have specified in the fields
above.
To Next Page
Loading...
