ZyXEL Communications P-660H Series - Figure 72 Application Priority Configuration; Table 43 Application Priority Configuration

P-660H/HW-D Series User’s Guide
129 Chapter 7 Wireless LAN
7.8.2 Application Priority Configuration
To edit a WMM QoS application entry, click the edit icon under Modify. The following
screen displays.
Figure 72 Application Priority Configuration
The following table describes the fields in this screen.
Service This field displays either FTP, WWW, E-mail or a User Defined service to
which you want to apply WMM QoS.
Dest Port This field displays the destination port number to which the application sends
traffic.
Priority This field displays the WMM QoS priority for traffic bandwidth.
Modify Click the Edit icon to open the Application Priority Configuration screen.
Modify an existing application entry or create a application entry in the
Application Priority Configuration screen.
Click the Remove icon to delete an application entry.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 42 Wireless LAN: QoS
LABEL DESCRIPTION
Table 43 Application Priority Configuration
LABEL DESCRIPTION
Application Priority Configuration
Name Type a description of the application priority.