ZyXEL Communications P-660W-Tx v2 User Manual

P-660W-Tx v2 Quick Start Guide
2
1 Set Up Your Hardware
1 Antenna: Point the antenna upwards (perpendicular to the ground).
2DSL: Connect the P-660W-Tx v2 to a telephone jack using a telephone wire.
3ETHERNET: Use an Ethernet cable to connect the Ethernet port on your computer to
the Ethernet port on the P-660W-Tx v2.
4POWER: Use the included power adaptor to connect the POWER socket to an
appropriate power source (see the User’s Guide for power adaptors specifications by
region).
5ON/OFF: Push the power switch to the ON position to turn on the P-660W-Tx v2.
DSL
ETHERNET
POWER
ON/OFF
1
2
5
3
RESET
4

ZyXEL Communications P-660W-Tx v2 Specifications

General

Brand	ZyXEL Communications
Model	P-660W-Tx v2
Category	Network Router
Language	English